ECS A785GM-M7 Spezifikationen PDF herunterladen (Seite 15)

Installing the Motherboard

CPU Installation Procedure

The following illustration shows CPU installation components.

To achieve better airflow rates and heat dissipation, we suggest that you use

a high quality fan with 4800 rpm at least. CPU fan and heatsink installation

procedures may vary with the type of CPU fan/heatsink supplied. The form

and size of fan/heatsink may also vary.

1 Unhook the locking lever of the CPU socket. Pull the

locking lever away from the socket and raising it to

the upright position.

2 Match the pin1 corner marked as the beveled edge

on the CPU with the pin1 corner on the socket.

Insert the CPU into the socket. Do not use force.

3 Push the locking lever down and hook it under the

latch on the edge of socket.

4 Apply thermal grease to the top of the CPU.

5 Install the cooling fan/heatsink unit onto the CPU,

and secure them all onto the socket base.

6 Plug the CPU fan power cable into the CPU fan

connector (CPU_FAN) on the motherboard.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 81 82

Keine Kommentare

ECS A785GM-M7 Spezifikationen Seite 15